عالم الهندسة الكهربائية
هل تريد التفاعل مع هذه المساهمة؟ كل ما عليك هو إنشاء حساب جديد ببضع خطوات أو تسجيل الدخول للمتابعة.


عالم الهندسة الكهربائية
 
الرئيسيةأحدث الصورالتسجيلالمقصود ب sag I_icon_mini_portalدخول

 

 المقصود ب sag

اذهب الى الأسفل 
كاتب الموضوعرسالة
م.صلاح المطري
Admin
م.صلاح المطري


عدد المساهمات : 86
نقاط : 229
تاريخ التسجيل : 13/12/2013

المقصود ب sag Empty
مُساهمةموضوع: المقصود ب sag   المقصود ب sag Icon_minitimeالإثنين ديسمبر 16, 2013 7:27 pm


Sag: Is defined as the vertical distance between the point
where the line is joined to the tower and the lowest point on the line.
The sag is as a result of the tensioning of the line and must not be too low otherwise the safety clearances may not be met. Also, the sag had to be such that it caters for ice loading in the winter of temperate climates. If the sag is large, and the line becomes heavily loaded, then the sag will further increase and breach the safety clearances. Similarly, if the sag is low, then when the line contracts in the winter, a low sag will indicate a high tension, and as a result of this contraction, the line may snap. Sag is inversely proportional to the tension of the line, and is given by the formula below.
For high tensions, the sag should be small.
For low tensions, the sag should be high.
Span is the horizontal distance between two towers
الرجوع الى أعلى الصفحة اذهب الى الأسفل
http://www.engworld.net
 
المقصود ب sag
الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1
 مواضيع مماثلة
-
» المقصود ب Ferranti Effect

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
عالم الهندسة الكهربائية :: قسم القوى الكهربائية Electrical power systems department :: قسم الخطوط الهوائيه لنقل وتوزيع الطاقه Over Head Transmission Lines-
انتقل الى: